This kit has wires pre-attached to the 16 small LEDs, a button and a 50mA Rechargeable battery already. This is for a Full police with Siren setup with 1x RRRR BBBB LEDs for the Advisor bar and has 2x RB pairs of strobes.

Kits can have their color changed at no charge. Please type your Build Notes in the field above before ordering. Please send us an email before ordering if other modifications are desired.

Modes includes:   

                             1. OFF
                             2. Low beam with tail lights
                             3. High beam with tail lights
                             4. Steady burn except advisor
                             4. Traffic Advisor Right
                             5. Traffic Advisor Left
                             6. Advisor blinks, Red/Blue strobes wig wag
                             7. Advisor in/out, Red/Blue strobes wig wag
                             8. Advisor Alternates, Red/Blue strobes wig wag
                             9. Police chase mode with siren

 

Speakers and sizes:

Please type in the notes which one you'd like. Default installed is the small rectangle version.

- Used for 1/64 Scale due to it's size.                                - Used for larger scale for louder sound
- Default speaker used

                                                          

Small Speaker 9x16mm Rectangle                                   Larger Speaker 27mm Round

Just drill your holes, make your lense and glue the pre-attached LEDs to your chasis.
Drill a hole on the base and glue the push button and the charger connector and you are set.

Note:            Careful not to glue the push button stick.
                     Only apply a dab of glue to the corners initially.

Add head lights and tail lights to your 1:64 car or larger scaled cars. No programming skills needed. This kit comes completely soldered and ready to be installed.

DON'T FORGET to buy the kit with the Charger Kit if you don't have one already.

Functions are easily controlled with a push button.
No power toggle switch needed due to battery saving smart Chip design.


Kit includes:

1 x LEDMFUV5PFS8 PCB
2 x WHITE LED (Head Lights) attached
2 x RED LED (Tail Lights) attached
2 x RB pairs of flashers
1 x RRRR BBBB Advisor bar attatched
1 x SPK9X16FLAT Speaker
1 x Button attached
1 x Lithium Battery 50mA attatched
1 x JST 1mm Connector attached (Charger Port)

Caution:    DO NOT Short the (+) and the (-) of the Lithium Battery together.